Golf Gti Turbo

Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr

Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr
Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr
Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr
Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr
Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr

Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr    Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr

We have the parts you need. Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Grey FMTIA6.

This replaces OEM part number 5WA. With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement.

Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by utilizing our CAD system and physical prototypes. The OEM plastic turbo inlet includes a ribbed hose that also disturbs the air flow within the inlet tract, this OEM part has a detrimental effect to the engines performance especially when tuned.

For the best possible gains, we have included a smooth silicone inlet hose that is included in the kit and meets the forge turbo elbow seamlessly, this product not only enhances the look of your vehicles engine bay the TIA6 inlet elbow and hose increase the volume and air flow significantly, this ensures the transition is as smooth as possible from the inlet tract to the turbo. Suitable for both left and right hand drive vehicles the turbo elbow is made from cast aluminium and machined to the perfect tolerance to enable a superb fit, this is a product that can be installed in approximately 30 minutes with only a few tools and can easily be accomplished by even the most novice enthusiast. During independent testing on a stock vehicle we found the throttle response to be increased with a gain of 12NM torque between 2000RPM and 2400RPM while holding noticeable smoother torque figure to just over 3300RPM along with a slight increase of BHP at 5300RPM, These figures can be expected to increase the more the vehicle is tuned and will typically produce a gain of around 7 BHP on stage 1 tuned vehicles this is because at the entry point to the inlet elbow the surface area in increased by 30%.

Combined with our product FMMD6 the turbo charger works more freely and should certainly be considered as one of the first two modifications to carry out on the new 2.0 petrol turbo (TSI) (EA888 GEN4 engine) with the engine code DNP and replaces the OEM part number 5WA. The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.

This means the hose is suitable to be used with either modern long-life coolants, Organic Acid Technology coolants O. Or air containing oil mist.

The construction of the hose has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. No engine check lights (EML). There is a choice of hose colour for this item - Black, Blue, Grey or Red - please state which colour you require when ordering (through a message to us after placing your order). We are a family run business started back in 2004 offering car customising and performance products from top brands such as Forge, K&N, Bailey, Wossner, Walbro, Gaz, The Loudest and many more. We also have products manufactured for ourselves and these are made to the highest standards.

Over the past 9 years here at Motorbling we have also expanded our product range into standard replacement parts such as Brakes Pads from EBC and Wing Mirrors from Lucas, so we can now offer everything you need, from customising, to performance to standard replacement parts for MOT'S and general repairs. We offer fantastic service and discounted prices so why shop anywhere else. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit.

If you think we've sent you the wrong item or size, please double check the full description in the listing, including the UK size before requesting a return. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Other Engine Tuning".

The seller is "motorbling" and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: Forge Motorsport
  • Part Manufacturer: Forge Motorsport
  • Part Manufacturer Number: FMTIA6
  • MPN: FMTIA6
  • Country/Region of Manufacture: United Kingdom
  • Manufacturer Part Number: FMTIA6
  • Other Part Number: 5WA.
    Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr    Forge Silicone Turbo Inlet Adaptor for VW Golf Mk8 GTI Red, Blue, Black or Gr